In this article, we'll show you how to replace the ear pads on most HyperX headphones. Completely replace your peeled, broken, and uncomfortable ear pads. Bring your favorite gaming headset to life.
Tools that may be needed are included in our product packaging. If you have difficulties with installation, please feel free to contact us at service@kronekalpasmos.com for more help.
Known Compatible Models:
- HyperX CLOUD 1
- HyperX CLOUD 2
- HyperX CLOUD 2 WIRELESS
- HyperX CLOUD ALPHA
- HyperX ALPHA S
- HyperX CLOUD CORE
- HyperX CLOUD STINGER
- HyperX CLOUD FLIGHT
- HyperX CLOUD MIX
Also Compatible with these Models(Earpads in oval without plastic parts):
- STEELSERIES ARCTIS 1/1 WIRELESS/3/5/7/7+/7P/7P+/7X/7 WIRELESS/9X/9 WIRELESS/ PRO/PRO WIRELESS/PRO GAMEDAC/PRIME;
- TURTLE BEACH STEALTH 300/400/500/600 GEN1/700 GEN 1/X12/ATLAS/RECON SPARK/RECON 50/50P
- ....
Installation Process
Step 1:
The ear pads are wraped on the side slot of the headphone, you can directly pull out the old ear pads entirely.
That's what it looks like after removing the earpads:
Step 2:
Snap the plastic edge on the back of the earpad into the slot on the headset. You can only snap in one side first, and then snap the plastic edge of the earpad into the groove of the earphone along the card slot.
Press any place in case the earpads slipped when installing
Step 3:
Same process repeated for the other sides.
DONE, you have brought back your headphone life, again.
For more details, you can watch our installation video, too.
